It's to only way to get a good seasoning on cast iron
What's your EDC handgun?
- Thread starter NYGuns
- Start date
It's to only way to get a good seasoning on cast iron
fnfalguy
.308 Win
Damn noobs. Don’t you know that without the model 2001 cast iron cup pan you gonna get kilt in the streets.
Yeah boi, in dem’ skreetz.
Xae289
.223 Rem
Hell yea. I just recommended one to my buddy the other day. He carries his Glock 41 while hunting but really is rightfully freaked out about holstering a Glock in his junky nylon holster. I got him to buy a good Kydex holster and this gadget. When his holster comes in, I'm going over to install the backplate and show him how to properly holster and draw the thing so he can carry with one in the chamber instead of with an empty chamber like he's been doing for years now.
M&P Shield Plus and the Miami Classic Lite holster
Love the holster
It's pretty nice. Lighter and more comfy than the regular Classic. It'll probably be my carry most of the time. I took it to the range and it performed very well, I can shoot it as well as the big P320 red dot gun. I have to drift the front sight though, hits a bit left.
That_FNG
6.5 Creedmoor
How does that holster system work in the summer? I assume it has to be worn over a t shirt and requires a cover garment like a jacket or button down shirt
I just got it actually, lol. I plan on carrying over a T shirt and under a collared button shirt which is my typical daily attire. I have carried my Glock 19 this way in the original Miami Classic extensively but it does print. The Shield in the Lite does not print at all. It looks to be a super lo-pro carry method. Reaching up to a high shelf in the store, using public restrooms, climbing up and down trucks and trailers, all activities during which a good shoulder holster will keep your gun under cover.
Sonofabitch! I've been looking at that rig for a while. I've got at least five Galcos and love them all. Had a couple of the Miami Classics and they were very comfy but printed too much with my clothes at the time. But this looks thinner through the shoulder straps. Bet the holster holds Glock 43, Sig 365, Springfield XD-S and maybe a couple more . . .
Still gotta give the classic some love.
Winter EDC. I do like them for comfort. Here with one of my zillion P99s
Last edited:
Oh I do sir, I definitely do:
When not in the carry rotation there it hangs, standing by to be tossed on for bump in the night duty........... or perhaps...........
fnfalguy
.308 Win
A bit of a suprise for me today, the g19 carries just as well as the J frame I was going to carry. The magazines in each of the vest pockets print the most in my eyes.
And know you all know that I'm pasty colored (some may call it a hue of catfish) and I'm missing my head.
And know you all know that I'm pasty colored (some may call it a hue of catfish) and I'm missing my head.
Wait for it... I'd wager that you could even pull off a G17/45/19x just as easily
fnfalguy
.308 Win
I’m sure I could. Was too lazy to grab the g17. I will wear that when I have a bit of a heavier cover on.
also helps to be 6’5. should try the ar pistol next, lol.
also helps to be 6’5. should try the ar pistol next, lol.
Last edited:
Xae289
.223 Rem
Just got my permission slip to pick up my new S&W 642. Took it to the range and was very happy with it, for the most part. It's super-light (17 oz, loaded), small enough for a pocket or to disappear into a waistbad, and seems to be very mechanically accurate when I do my part. The stupidly bad sights were keeping me from doing my part, however.
I can't leave a gun alone. I don't plan to do much to this one at all, but I hate the gray-on-gray, gutter sights. Thankfully, my wife has a lot of nail polish. Some orange on the front ramp, a little white on the rear notch, and some black on the gutter... they're no night sights, but they're at least sights at all now.
I can't leave a gun alone. I don't plan to do much to this one at all, but I hate the gray-on-gray, gutter sights. Thankfully, my wife has a lot of nail polish. Some orange on the front ramp, a little white on the rear notch, and some black on the gutter... they're no night sights, but they're at least sights at all now.
PaperShooter
9mm
EDC is a stock Smith & Wesson M&P Shield 9MM. Dead nuts accurate. No upgrades necessary. Too many holsters to list, I have a problem and need to start selling a few of them, but summer carry has been mostly IWB in a Remora holster.
bambino1031
.177 BB
Warm weather carry is a Glock 43x in T1C appendix rig with sidecar. Cold weather carry is a CZ 75D PCR in a black arch Revcon with or without the Phlster Enigma.
So I haven't changed my EDC because well no reason to.
But I did get a new holster. Dark Star Gear Rigel. Paired with their Koala mag carrier....
Also for any of the new people, Gen 5 Glock G34 MOS with Trijicon RMR and Surefire x300u.
But I did get a new holster. Dark Star Gear Rigel. Paired with their Koala mag carrier....
Also for any of the new people, Gen 5 Glock G34 MOS with Trijicon RMR and Surefire x300u.
So, you waiting to see Cloud Defensive's pistol light before you go with Modlite?
Both yes and I saw a fair amount of issues with the initial (and possibly still) runs of the PL350. For as long as it took to be released sadly Cory didn't let his product live up to the hype and failed on a few key parts, mainly the switches..
With that being said based on what the Cloud Defensive EPL-D stats are and size.. well it just blows the PL350 out of the water.. shit the EPL-D output is better than most rifle lights on the market.
Also for anyone interested.. here is a teaser of both the EPL-D and EPL-C (Enhanced Pistol Light Duty/Carry) from Cloud Defensive.
They are still working on their switches.
Proposed output from each is as follows
Duty - 1,100 lumens and 65,000 candela
Carry - 1,100 lumens and 35,000 candela
Both run off a single rechargeable 18350 battery
They are still working on their switches.
Proposed output from each is as follows
Duty - 1,100 lumens and 65,000 candela
Carry - 1,100 lumens and 35,000 candela
Both run off a single rechargeable 18350 battery
I do want to point out I do plan on swapping the single clip mount out for 2 "pull the dot" soft loops
fnfalguy
.308 Win
I am also a huge fan of DCC, which I believe this monoblock may be or atleast a copy of. And when playing around with the new holster I noticed I sometimes get my shirt stick on the clip during the draw
This part, and even scrapped my finger once
Also I've always been a huge fan of the soft loops.. they take a bit longer to put on when getting dressed but I also believe they are one of the most secure mounting options and while a pain to take off that's actually a positive to me..
..
And looking at that close up, this clip is not a DCC
Dr. Evil
20×102mm Vulcan
Since I will be carrying my 43X MOS (when Ulster county graces me with a phone call) appendix the soft loops stick out further making it a bit less concealable. I should be getting delivery of my JM Custom Kydex holster today that has 2 offset DCC's to spread the leverage for more stability as well as a slimmer profile. Ordered black.
Also received a Tenicor Certum3.
I will keep the one that carries the best and return the other one.
Last edited:
I love JMC holsters. It's what I used with my P07
So it looks like they are a fair bit shorter than the PL350?