SmallGameAddict
.308 Win
Nice job!
"Ghost guns" A-9903A amended ( merged with senate ghost gun thread)
- Thread starter gunpoliticsny
- Start date
Cavalry
.308 Win
Not sure how well that third pin hole is going to fly in NY lol
spat
.700 Nitro Express
Once you decide not to obey their BS, might as well go all the way.
fnfalguy
.308 Win
those wacky CAD templates, huh?
Nice if i want to change the upper on my AR15, FELONY. Oh you want to change your buffer? FELONY or you want to change the stock on your Ruger 10/22? FELONY.
If this passes there will be THOUSENDS of overnight felons born. I know i would have enough to be put away for life, and i have never even had a speeding ticket.
If this passes there will be THOUSENDS of overnight felons born. I know i would have enough to be put away for life, and i have never even had a speeding ticket.
BDinPutnam
.475 A&M Magnum
Balls deep.
kev74
20×102mm Vulcan
Man, I'm getting sick of this crap.
MothMan
.338 Win Mag
BDinPutnam
.475 A&M Magnum
"If"?
It did already, didn't it? Just waiting for the queen's signature I thought.
It did already, didn't it? Just waiting for the queen's signature I thought.
SuffolkArms
.40 S&W
Is the legislative session over or can the assembly still come back and vote for this?
gunpoliticsny
6.5 Creedmoor
The session calendar went out the window months ago.
I do expect them to vote on the bills sometime soon.
PutnamCharlie
6.5 Creedmoor
So just for clarity my 9mm is not illegal yet? I was under the impression that this was passed and in effect.
Bozo
.45 acp
Passed the Senate, but not the Assembly (yet). As noted it will pass there and be sent to the princess. It will take effect 180 days after he signs it into law.
If this is signed into law you will need to put a serial number on all home made guns. That way you don’t have to fight for your freedom in court proving you made it before the law was passed. I know it is expose facto but in the PRNY the constitution does not apply.
ManrisFrack
.223 Rem
You have 6 months from the effective date to have existing "ghost guns" properly serialized according to 18 US Code Section 923, Subsection (i).
I'm not sure about the registration part though. If you take it to a "gunsmith" to serialize after this becomes law, I believe the gunsmith is obligated to register it with the state. However, if it is properly marked according to that federal law prior to the passage of this law, registration may not be required? The bill is very circular in this instance and I'm not sure if my interpretation is correct.
If my interpretation is correct, it would be wise to slap a serial number and your name on any 80% guns ASAP.
PutnamCharlie
6.5 Creedmoor
They want my name on it? That's not going to happen. I will melt it down first!
BDinPutnam
.475 A&M Magnum
Register what?
If it's a SUCK act compliant weapon anyway what is there to "register"?
1075tech
.338 Win Mag
I'm afraid of ghosts.
Well i have made my mind, If NY is going to make me a Felon then i might as well just do what i want. Why comply with anything if they are just going to make some new rule to turn you into a criminal. If i am going to have 13 felony's already from this dumb ass bill, why not add a few more and ignore the UN-SAFE-ACT.
ManrisFrack
.223 Rem
If it isn't properly serialized and registered, it's a "ghost gun." ""Ghost gun" means a firearm, rifle or shotgun that does not comply with the provisions of Section 265.07..." That section requires registration by the gunsmith for anything he manufactures, assembles, blah, blah, blah. There is an exemption for pre '68 guns (when serialization was required federally).
So either the millions of guns manufactured and properly serialized from FFL 07's all have to go through a gunsmith for state registration to avoid being a "ghost gun" or any homemade gun that has the proper markings prior to the effective date doesn't need to get registered with the state. My take is that anything properly marked will not have to visit a gunsmith for "manufacturing" work, so it doesn't need to be registered. Anything that needs to be marked after the effective date has to visit a licensed smith to get serialized and marked AND registered. This is the circularity that I was referring to before.
Another fucked up thing... it looks like gunsmiths have to serialize, mark and register for assembly work. So if you do take anything (even a stock 10/22 made in the 80's) to a gunsmith to swap a free float or stock or barrel or etc. they have to put their marks on it and register it?
This shit is a giant clusterfuck. I'm glad I'm not a lawyer.
meketrefe
.450/400 Nitro Ex
Do they grandfather Pre-Ghost guns? ...I am confused.
ManrisFrack
.223 Rem
Short answer - only if you make them non-ghosty by having them serialized and registered with the state.
My best guess is that they want you to serialize and register the "ghost guns" you already have. If you want to wait and have a "gunsmith" do the serializing and registering after the bill becomes law (but within six months), you can keep your former "ghost gun".
If it was made before 1968 you can keep it and your ghost gun can stay ghosty - no engraving or registration needed.
I think there's a loop-hole where you can take your post-'68 ghost gun, engrave it before this becomes law per the federal marking requirements for firearm manufacturers and it can stay ghosty (you don't have to register it). I think it just didn't occur to them that anyone who has successfully made a gun in the basement will likely be able to find the means to serialize and mark said gun in that same basement. It has to be done before this bill becomes law because this bill would also make gunsmithing without a license a felony.
Keep in mind, I'm just a layman trying to make sense of legalese. I could be totally off base here.
meketrefe
.450/400 Nitro Ex
Ok but how do they grandfather something no one can see or catch?
Gosts can roam around for centuries.
What defines a person is a gunsmith?
I hope a reloader is not consider an ammunition manufacturer neither.
Gosts can roam around for centuries.
What defines a person is a gunsmith?
I hope a reloader is not consider an ammunition manufacturer neither.
IrishMick
.357 mag
Don't worry meketrefe. I'm sure they have that one on deck.
BDinPutnam
.475 A&M Magnum
@ManrisFrack I appreciate the insight. I admit I'm still struggling with "register with the state" (specifically the "state" part). Is the implication that the serial number should be in an FFL's (federal) book?
I'm sorry... But I'm not engaged in "business" as prescribed in 18 US Code Section 923...
Manufacture and assembly of a firearm for personal use, never intent on transfer or sale falls outside this statute. Because I make and build something, by definition, dies not make me a "manufacturer" or what the term implies, a "business"...
I also do not see how the "State" can interfere with a process already, by precedent, a Federal Function ... The serialization and registry of firearms made for person use. Question is will the Federal Gov't step in to reign in the over reach of States looking to encroach upon their territory?
The extreme over reach and grievous malfeasance placed into the bill, requiring gunsmiths to become agents of the State by taking property, parts that is, and seizing it, defacing it with serialization, reporting it to the State and not releasing it without authorization (permit) is so outlandish, it's hard to even process...
It's simple though, the more they put in "paper" thinking somehow or another they've fixed something, will just drive more of the activity to underground and off the radar scenarios. NY Safe Act is the prime indicator of what's to be, NON COMPLIANCE!
They don't talk about how INEFFECTUAL the act is, was, in regard to registration. This would be no different except for those who worry about the big bad wolf that never comes! Like all the knee jerkers who jumped on the NO ammo for you (NY'ers)... It will cause problems, except for people in the "know" or people with already established connections. So FUNY, FUAC!
What next? Serialize every shell casing?
Gimme a fucking break! So tired of all this fucking heavy handed shit! Let's criminalize an activity that affects law abiding citizens so we can make it look like we are doing something, while at the same time coddling actual criminals rioting in the streets and releasing career criminals to the streets for humanitary reasons... It's all so convoluted and reversed, it makes you fucking head hurt!
Fuck them and the horses they're riding!
Manufacture and assembly of a firearm for personal use, never intent on transfer or sale falls outside this statute. Because I make and build something, by definition, dies not make me a "manufacturer" or what the term implies, a "business"...
I also do not see how the "State" can interfere with a process already, by precedent, a Federal Function ... The serialization and registry of firearms made for person use. Question is will the Federal Gov't step in to reign in the over reach of States looking to encroach upon their territory?
The extreme over reach and grievous malfeasance placed into the bill, requiring gunsmiths to become agents of the State by taking property, parts that is, and seizing it, defacing it with serialization, reporting it to the State and not releasing it without authorization (permit) is so outlandish, it's hard to even process...
It's simple though, the more they put in "paper" thinking somehow or another they've fixed something, will just drive more of the activity to underground and off the radar scenarios. NY Safe Act is the prime indicator of what's to be, NON COMPLIANCE!
They don't talk about how INEFFECTUAL the act is, was, in regard to registration. This would be no different except for those who worry about the big bad wolf that never comes! Like all the knee jerkers who jumped on the NO ammo for you (NY'ers)... It will cause problems, except for people in the "know" or people with already established connections. So FUNY, FUAC!
What next? Serialize every shell casing?
Gimme a fucking break! So tired of all this fucking heavy handed shit! Let's criminalize an activity that affects law abiding citizens so we can make it look like we are doing something, while at the same time coddling actual criminals rioting in the streets and releasing career criminals to the streets for humanitary reasons... It's all so convoluted and reversed, it makes you fucking head hurt!
Fuck them and the horses they're riding!
Robin
.475 A&M Magnum
So, is free hand engraving acceptable, or does it have to be in block Roman. FUAC 001 for example, engraved, could be very nicely done. As far as registration, its' in my date book, I think I'm good.
Robin
Robin
Cavalry
.308 Win
The state doesnt give a standard, however the feds do. Maker, City and state, serial number. Needs to be deeper than .003" no smaller than 1/16" tall
SmallGameAddict
.308 Win
I was just thinking about that very same thing this morning, how they would outlaw ammo reloading