Loworange88
.40 S&W
Love my SCR. A worthy upgrade is extended take down pins. Makes life a little easier to take the rifle down.
fightlite scr hmmm worth a look?
- Thread starter Edwardteach72
- Start date
I may hold off a bit on a new barrel for the SCR, I re-sighted it in yesterday at 50 yards off a bi-pod with some Winchester 45gr rds, I didn't have a marker so I aimed at what seemed to be the center of the plate, top left was first with 5rds then I let a friend of mine give it a try top right 5rds then back to me for the bottom plate with 5rds. This is with a Nikon 3-9x40 bdc scope, which I may change to a Nikon Coyote Special 4.5-14x40 with side focus that was on my Mini 14
So now I will try some different weight bullets to see what shoots best.
So now I will try some different weight bullets to see what shoots best.
Last edited:
On another note when I installed the Troy Ambi Mag Release last week be sure not to make it to tight. I was getting failures to fire, so I loosen it one turn and that fix it!
I want to get a non reciprocating side charger for my SCR. There are many out there that do not need any work done to the bolt carrier so the SCR bolt carrier should work fine.
Any suggestions for brand?
Any suggestions for brand?
If this is what I think (a side charging handle like a Mini 14) this would interest me for sure! I really don't want to raise the scope on mine any more!
Think of how the IWI Galil Ace is set up.
Yes I just Google it and watch a few videos. Going over to Snipers Hide to see if there is any info on this for the SCR?
Nice.
Yeah I think due to the way the lower and stock is for the scr it would benefit greatly from a side charger
Yes after I move the scope back 2 spaces to get a better sight picture, it does make get to the charging handle a bit tight!
Other probably good option and a little less expensive would be the raptor charging handle
Thanks, will look into that also!!
I already have a Radian Raptor Ambidex charging handle but I still find its difficult to get to the charging handle because of my cantilever.
I just looked at the pic's of your SCR, What optic is that? If a straight red-dot do you need in that far back if magnified I can see why.
Never mind I found the answer. 2.8 in Eye Relief.
Specifications for Vortex Spitfire 3x Prism Scope w/ EBR-556B MOA Reticle:
Color: Black
Finish: Hard Anodized Matte
Fabric/Material: Aluminum Alloy Chassis
Magnification: 3 x
Objective Lens Diameter: 32 mm
Reticle: EBR-556B MOA
Eye Relief: 2.8 in
PA Guns & Ammo
.45 acp
Robin
.577 Tyrannosaur.
https://gibbzarms.com/product/g4-side-charging-upper-receiver-right-handed/
Probably the best one out there.
Robin
BDinPutnam
.475 A&M Magnum
Reminds me very much of the old Edson strip clip cap guns from the 1980's. I like!
Robin
.577 Tyrannosaur.
I was at the range and saw my first SCR up close. The hand guard looks stupid and out of proportion, the barrel diameter is too small and with no magazine makes it look like a pellet gun, in fact at a glance it could be mistaken for a Crossman. That was my honest first impression and is totally based on visual's alone. Aesthetic's sell and with just a a few tweaks I could make that a much more desirable gun. The guy that owned it said he really likes it, even better than his AR and offered to let me shoot it but I was on my way out and he was still unloading stuff so I took a pass.
Robin
Robin
ArmedCorgi
.475 A&M Magnum
I love the look of parkerized metal with wood furniture. Some nice wooden rail guards would really tie that all together.
1st I doubt he liked it better than his AR (unless he has a thordson stock or pinned mag AR) sounds more or less like him trying to accept that's what he has to deal with.
And as for the aesthetics, the handguard and barrel? Well it takes all standard AR uppers (just their proprietary lower) so who knows if the owner put their own upper together or if they just bought the most basic upper that they could or got one with the SCR which honestly looks like something they just tossed together to keep the cost down knowing people would change stuff out anyways
Robin
.577 Tyrannosaur.
Well aren't you the mind reader, you may doubt him Karnak, but I was there and believe his sincerity. It was a stock, off the shelf gun, geeze. Not ugly but with a bit of work it could be a very nice off the shelf gun. You assume so much.
Robin
Robin
Marine Cpl
.577 Tyrannosaur.
The stock off the shelf upper is actually exactly what you described.
Oh boy sorry for speaking and having option. Did someone miss the early bird special, or did one of those damn millennials ask to see your ID again
Robin
.577 Tyrannosaur.
You make a lot of far fetched wild assumptions, justifiably get called out on it and then try to characterize me as a doddering old fool. Hmmmm, I can only conclude that while very knowledgable about some guns, by and large, you're an idiot.
Robin
Robin
Far fetched assumptions? Oh ok? How by assuming that the dude is trying to justify owning a nanystate gun by saying he likes it better than an actual AR15.
Yea ok the scr is so much better and more ergonomic than a standard AR that's why all the spec ops and competition shooters and even hunters are all ditching their M4s and AR15s for the scr..
I mean yes I made tha assumption
Thankfully I wont assume that a business is in the wrong for asking to see ID like some people
And called out? Called out on what I just made some suggestions and you got all white knight like I was attacking the guys integrity
Robin
.577 Tyrannosaur.
Lord help us.
Robin
Robin
No answer? Sounds about right
Robin
.577 Tyrannosaur.
Thank you for the confirmation, stay the course, you know no other.
Robin
Robin
Oh boy you really are good at this? So no answer on how I got called out?
It's ok Robin I'm sure you can go yell at a manager later today about how their policies dont apply to you