Options for AR-15 fixed mag

[dsdmmat]

A couple of years ago I had the misfortune of having some guns end up in the hands of the State police. One AR308 had a spur and two AR15s had fixed mags. With a set screw in the mag release button. No epoxy applied to anything. They were released back to me without question.

 

[dwa12479]

Thats exactly why I never understood where this whole "epoxy the nut on the mag lock" came from.

A mag lock is the "compliance" in itself.

There was a NYSP interpretation lot long after unSAFE passed that modifications to a now illegal AW had to be "permanent". Its no where in the law, but many people took that statement from NYSP as an actual legal definition, which is why there are so many fixed mags out there with epoxy or similar on them.

 

[Chevusa]

There was a NYSP interpretation lot long after unSAFE passed that modifications to a now illegal AW had to be "permanent". Its no where in the law, but many people took that statement from NYSP as an actual legal definition, which is why there are so many fixed mags out there with epoxy or similar on them.

There is no such thing as permanent. Anything and everything can be undone. Bring your gun to my garage and I will remove any lock that you have installed.

 

[dwa12479]

There is no such thing as permanent. Anything and everything can be undone. Bring your gun to my garage and I will remove any lock that you have installed.

Im well aware of that, thank you. I was answering his question on why people epoxy set screws on mag locks. I didnt say I agree with it or that epoxy actually makes it "permanent". Thats why permanent was in quotes.

 

[nortatoga]

Oh I believe you, I'd have no reason not to take your word

ARES Defense Changes Name To FightLite Industries

The manufacturer of the SCR rifle and MCR belt feed system for M4 style rifles, ARES Defense Systems, is changing its name to FightLite Industries to more accurately reflect their current product line-up as well as upcoming additions to the line.Geoffery Herring, the President and CEO of the...

www.thefirearmblog.com

 

[Drinkthekoolaid]

Im well aware of that, thank you. I was answering his question on why people epoxy set screws on mag locks. I didnt say I agree with it or that epoxy actually makes it "permanent". Thats why permanent was in quotes.

Thanks. That's the most logical explanation of where that came from. It was something I never understood.

 

[spat]

When I still lived in occupied territory I just put a nut and loctite on my AR pistol in place of the normal release.

There is no way to drop the mag without disassembly.

There is no official guidance on how difficult dropping a mag has to be to be "fixed", so it's all going to come down to your interpretation and comfort level.

Some on here will say "ask a lawyer", but the problem with that is that the law is unclear, so ask 5 different lawyers and you'll get 5 different answers then probably go with the one you would have picked on your own.


Use the search, there is a lot of lively discussion of the issue here.

 

[spat]

It depends on what your intended usage will be.

I bet (merely for fictional purposes on the internet) that many people who go the fixed mag route do so with the idea that it will be their SHTF rifle in a zombies scenario and keep a functional magazine release somewhere handy.

Mine was because I was building an AR pistol toy. It was never going to be a practical weapon (7.5" barrel and 5.56 ammo, you're better off with a 9mm), and fixed mag is the only way to make an AR pistol compliant.

That has obviously been reversed once we landed here in free America.

 

[Cleck]

As far as having it looked at, a few ranges I have gone to here in Rochester take a look before they let you shoot, it has to be compliant, or they won't let you shoot. They've seen my SAFE Mod tons of times, no epoxy over the two screws, and have said nothing.

 

[Podmonkey]

I got mine 4 years ago for $599.00 used but unfired. Gen 1 also, sent it in to ARES for the trigger upgrade at no charge. Got a sweet AREO handguard from @Robin in a KARMA on here and a 19'' Green Mountain barrel recommended by @dsdmmat, very happy with it!!

View attachment 121886

That looks pretty GD cool, gotta say.
It's got kinda of an 80s SWAT sniper vibe in back, modern tactical up front and I think that's pretty sweet.

 

[ArmedCorgi]

I got mine 4 years ago for $599.00 used but unfired. Gen 1 also, sent it in to ARES for the trigger upgrade at no charge. Got a sweet AREO handguard from @Robin in a KARMA on here and a 19'' Green Mountain barrel recommended by @dsdmmat, very happy with it!!

View attachment 121886

I would still like to get one of these.

 

[Cooolone]

Only case I know of happened no too far from me. 2 kids trespassing at rock quarry. Shot hit a neighbor building. Charged guy with reckless endangerment, confiscated gun which had an armr2. This was not long after safe act. Shooter from the other forums was keeping us informed on case, then heard nothing. I believe they probably confiscated, and dropped charges as a plea because that's the last I heard.

This is not what I asked... Trespassing is the point here. Anything else is gravy!

As far as having it looked at, a few ranges I have gone to here in Rochester take a look before they let you shoot, it has to be compliant, or they won't let you shoot. They've seen my SAFE Mod tons of times, no epoxy over the two screws, and have said nothing.

I've only ever had my ammo looked at for obvious reasons.

But if they (range officer) wanted to inspect my firearms, I would tell them not a chance and I'd move on if it was a problem for them. Never have I had a firearm inspected, period! And never, would I allow a range officer to become an agent of the State or attempt to enforce any ridiculous powers over me in this regard. If a range rule, private club rule, etc., I would not feed the trolls by participating there. Is akin to buying a firearm at Dick's Sporting Goods... Lolz



But that's just me...

 

[spat]

This is not what I asked... Trespassing is the point here. Anything else is gravy!



I've only ever had my ammo looked at for obvious reasons.

But if they (range officer) wanted to inspect my firearms, I would tell them not a chance and I'd move on if it was a problem for them. Never have I had a firearm inspected, period! And never, would I allow a range officer to become an agent of the State or attempt to enforce any ridiculous powers over me in this regard. If a range rule, private club rule, etc., I would not feed the trolls by participating there. Is akin to buying a firearm at Dick's Sporting Goods... Lolz



But that's just me...

Just tell them it's a *registered* AW, no you don’t carry any paperwork to prove it, it's not required, so why would you bother.

 

[mca90guitar]

I have a cross armory lock, p mag and bear defense loader. Honestly if I could go back in time I would have went featureless instead. The fixed mag is more comfortable but getting all ten rounds to consistently load has proven a challenge. I mostly use it with the minus 5 insert for the p mag and it works fine that way.

 

[Chevusa]

I have a cross armory lock, p mag and bear defense loader. Honestly if I could go back in time I would have went featureless instead. The fixed mag is more comfortable but getting all ten rounds to consistently load has proven a challenge. I mostly use it with the minus 5 insert for the p mag and it works fine that way.

A BF 10 loader with a Lancer mag will solve your problems.

 

[Grimscale]

$0.20 nut from Runnings. No epoxy, no loctite. Utilizes the normal mag catch.

 

[pshift]

I have a cross armory lock, p mag and bear defense loader. Honestly if I could go back in time I would have went featureless instead. The fixed mag is more comfortable but getting all ten rounds to consistently load has proven a challenge. I mostly use it with the minus 5 insert for the p mag and it works fine that way.

I've decided to go the same route with a PSA kit. You may wish to check what generation PMAG you have because they have several generations of the now. Magpul makes fine products, mostly.

 

[Chevusa]

AR Maglock here.

AR MAGLOCK – Fixed Magazine Lock & Release Kit – AR MAGLOCK – Fixed Magazine Lock & Release Kit

armaglock.com

How do you figure this is legal? You can separate the upper and lower, drop the mag, put them back together, and now you have a complete rifle that has no mag installed which "is capable of receiving a detachable magazine". Not even close to meeting the safe act standards.

 

[ArmedCorgi]

Maybe the mods can merge all the other threads on this EXACT topic with the same EXACT products, opinions, arguments and most importantly the same EXACT non answer of no one knows what will or won't get you introuble.

 

[spat]

How do you figure this is legal? You can separate the upper and lower, drop the mag, put them back together, and now you have a complete rifle that has no mag installed which "is capable of receiving a detachable magazine". Not even close to meeting the safe act standards.

It's only a detachable mag if you can detach it without disassembling the rifle.


What you have described is a rifle capable of accepting an attachable magazine. There is no prohibition on those.

 

[dwa12479]

It's only a detachable mag if you can detach it without disassembling the rifle.


What you have described is a rifle capable of accepting an attachable magazine. There is no prohibition on those.

^^^ Precisely.

An SKS is considered a fixed magazine, but can certainly be removed/detached with some work.

 

[Chevusa]

It's only a detachable mag if you can detach it without disassembling the rifle.


What you have described is a rifle capable of accepting an attachable magazine. There is no prohibition on those.

The problem comes when the mag is removed. The rifle may now “accept a detachable magazine” as described in the prohibition.

It is exactly the same as any other standard rifle with no mag inserted. They can and will all “accept a detachable magazine”. They are illegal.

I’ve looked into these in detail. If there were a way to make it not accept the magazine unless it was disassembled it would fly. As is,no. They even state so on the website. Only legal in CA.

 

[Chevusa]

We can all play games and dance around online but there is no doubt that if you were sitting in the court room and your rifle was about to be presented to the jury you’d feel a whole lot better with a fixed mag than you would with this device that allows the mag to drop and be reinserted in a matter of 2 seconds. I’m sure the jury won’t see it your way. They aren’t gun people. They don’t know. They will be given jury instructions from the prosecution and they will then see right in front of them how you are circumventing the law and the rifle is functioning just as the law sought to ban said operation.

What you do in your home is your business. But I wouldn’t bring one of these out around others or be driving around with it in my car.

You’ve been advised.

 

[spat]

The problem comes when the mag is removed. The rifle may now “accept a detachable magazine” as described in the prohibition.

It is exactly the same as any other standard rifle with no mag inserted. They can and will all “accept a detachable magazine”. They are illegal.

I’ve looked into these in detail. If there were a way to make it not accept the magazine unless it was disassembled it would fly. As is,no. They even state so on the website. Only legal in CA.

No, it cannot accept a detachable magazine.

It can accept a magazine, but not a detachable one.

"Please demonstrate how this rifle can accept a detachable magazine"

"Click" "There, you see, it can accept it"


"Ok, now please demonstrate how the magazine is detachable"

"Anyone have a screwdriver ?"

 

[Celt]

I still don't think that's required to do. But at the end of the day you have to use your own level of comfort.

Personally I'm comfortable with just a magazine lock. The law doesn't state the magazine lock needs to be glued in.

The safe act sucks so bad because parts of it are as clear as mud. It's poorly written and ambiguous

Agreed, nothing says "permanent" regarding this aspect that I have ever seen.

 

[Edwardteach72]

I actually don't even care about this thread or even remotely remember what I posted in it to get notifications...

But man I sure am glad I did, now I have my new favorite "signature" (look below)

 

[fnfalguy]

 

[Robin]

Time to punt and sing the tranny national black anthem.
robin

 

[Chevusa]

No, it cannot accept a detachable magazine.

It can accept a magazine, but not a detachable one.

"Please demonstrate how this rifle can accept a detachable magazine"

"Click" "There, you see, it can accept it"


"Ok, now please demonstrate how the magazine is detachable"

"Anyone have a screwdriver ?"

The only thing preventing the mag from detaching is you pressing the release button. Just as a standard setup. Remember. The mag can be inserted regardless of the gun being separated or assembled. End of story. You’ll be eaten alive in grand jury. But it plays out perfectly in your mind.

You’ve been advised.

 

[Chevusa]

Also no screwdriver is needed. You’re clearly not familiar with said lock. You separate the upper and lower an 8th of an inch and it releases in a fraction of a second. God bless, you’re gonna need it.