Custom triangle handguards and other retro builds

[BDinPutnam]

What about tape, old school style? I'm not endorsing this particular product btw.

Tiger Stripe Products® Tape Wrap

US Night Vision Corp. manufactures as well as resells high quality Military, Law Enforcement and Consumer grade night vision systems. Night Vision Monoculars, Night Vision Goggles, Night Vision Binoculars, Night Vision Scopes, Night Vision Camera Systems, and Night Vision Weapon Sights, are a...

usnightvision.com

 

[Edwardteach72]

I mean, I suppose rattle canning it would be cheaper but a lot more work and the end result could go either way.

Honestly that's not a bad price and and I think would end up better than rattle can for that type of camo

 

[Edwardteach72]

What about tape, old school style? I'm not endorsing this particular product btw.

Tiger Stripe Products® Tape Wrap

US Night Vision Corp. manufactures as well as resells high quality Military, Law Enforcement and Consumer grade night vision systems. Night Vision Monoculars, Night Vision Goggles, Night Vision Binoculars, Night Vision Scopes, Night Vision Camera Systems, and Night Vision Weapon Sights, are a...

usnightvision.com

Yess this as well

 

[BDinPutnam]

Oh and you absolutely need an old OD GI canvas sling...

 

[BDinPutnam]

AND by the way because I don't think anyone else mentioned it- nice job on the grip!

 

[Edwardteach72]

Oh and you absolutely need an old OD GI canvas sling...

Thank you for making it so I'm not the only bad influence

 

[ArmedCorgi]

Thank you for making it so I'm not the only bad influence

I too, am a bad influence.

 

[ArmedCorgi]

I too, am a bad influence.

For example:

Fake Suppressor / Barrel Extension - Non-Threaded (Slip-on)

Finish the look of your build and extend the barrel. These can be pinned and welded to comply with arbitrary rules and regulations by an agency.

www.tacticool22.com

 

[ArmedCorgi]

Oh and you absolutely need an old OD GI canvas sling...

Was planning on it. Just need to get the front sling swivel and rivet pin.

 

[ArmedCorgi]

AND by the way because I don't think anyone else mentioned it- nice job on the grip!

Thanks! It could be better, but still looks good.

 

[BDinPutnam]

For example:

Fake Suppressor / Barrel Extension - Non-Threaded (Slip-on)

Finish the look of your build and extend the barrel. These can be pinned and welded to comply with arbitrary rules and regulations by an agency.

www.tacticool22.com

Annnd.. I was totally googling these earlier today, haha.

 

[ArmedCorgi]

Annnd.. I was totally googling these earlier today, haha.

He also has threaded barrel adapters that slip over the barrel and are held by set screws. You could install one of those and then use a reverse thread on fake can.

1/2-28 Barrel Thread Adapter For 5/8" Barrels – Black SST

Quickly and easily convert your 5/8" diameter, non-threaded barrel to a 1/2-28 threaded end so you can attach any legal end-of-barrel accessories.

www.tacticool22.com

Guntec USA AR-15 Reverse Thread Slip Over Fake Suppressor Up to 15% Off — 6 models

Shop Guntec USA AR-15 Reverse Thread Slip Over Fake Suppressor | Up to 15% Off 4.6 Star Rating on 45 Reviews for Guntec USA AR-15 Reverse Thread Slip Over Fake Suppressor Best Rated...

www.opticsplanet.com

 

[ArmedCorgi]

He also has threaded barrel adapters that slip over the barrel and are held by set screws. You could install one of those and then use a reverse thread on fake can.

1/2-28 Barrel Thread Adapter For 5/8" Barrels – Black SST

Quickly and easily convert your 5/8" diameter, non-threaded barrel to a 1/2-28 threaded end so you can attach any legal end-of-barrel accessories.

www.tacticool22.com

Guntec USA AR-15 Reverse Thread Slip Over Fake Suppressor Up to 15% Off — 6 models

Shop Guntec USA AR-15 Reverse Thread Slip Over Fake Suppressor | Up to 15% Off 4.6 Star Rating on 45 Reviews for Guntec USA AR-15 Reverse Thread Slip Over Fake Suppressor Best Rated...

www.opticsplanet.com

Or actually, that might not work since the thread adapter would be wider than the fake can's inside diameter. It wouldn't slip over.

 

[Elwood]

@ArmedCorgi What method did you use for the fixed mag ?
the armalite fairy paid me a visit.

 

[ArmedCorgi]

@ArmedCorgi What method did you use for the fixed mag ?
View attachment 71998
the armalite fairy paid me a visit.

So awesome!!! I'm super envious. Can't wait to see how this build turns out.
For the fixed mag I just used this.

Magazine Locking Button

Visit the post for more.

nytriggerguards.com

 

[ArmedCorgi]

And I am using a ProMag 10/20 steel or aluminum magazine. They have been the only 10/20 metal mag that comes close to the Colt mags that I have found. I wish they were the same color as the Colts, but such is life. If you use one of the ProMags, be sure to get some Magpul followers to swap out. The ProMags's follower is garbage.

 

[ArmedCorgi]

So I ordered an A1 stock, just to see how it would look. I plan on building another retro AR in the future, so if it ends up looking weird on my current build, I'll at least have it for the next one. I also ordered the front sling swivel and rivet pin.
No tiger stripes yet. I'm not yet sold on it.

 

[BDinPutnam]

So I ordered an A1 stock, just to see how it would look. I plan on building another retro AR in the future, so if it ends up looking weird on my current build, I'll at least have it for the next one. I also ordered the front sling swivel and rivet pin.
No tiger stripes yet. I'm not yet sold on it.

TBH I'm not either, I think the black looks good.

@Elwood I was never a big fan of the dissipater but that looks sweet. Is that a 16" (or 18"?) with a rifle gas system?

 

[ArmedCorgi]

Oh and @Elwood, just so you know, I have that extra Entry buttstock incase you want to try something like that also. No pressure, just FYI incase. I'll give you a good deal on it should you want to go that way.
It will likely go up for sale on the forum soon anyway, but thought I'd give you the heads up here.

 

[Elwood]

TBH I'm not either, I think the black looks good.

@Elwood I was never a big fan of the dissipater but that looks sweet. Is that a 16" (or 18"?) with a rifle gas system?

Rifle length gas system, 15 1/2 barrel the 3 prong is pinned and welded to bring it up to length. Brownells enlarges the gas port to eliminate short stroking, which was the original problem with the decrease in dwell time on the original 605 colt

 

[Elwood]

The A1 grip and lower parts kit should be in today, now just need the gun shop open to pick up a lower, gonna order up one of those mag lock buttons to do the fixed mag. That looks like the best option aesthetically. Better pictures to come along the way once I actually get the lower and start cobbling it together.

 

[ArmedCorgi]

just need the gun shop open to pick up a lower,

If you are near the Albany area, my ffl is open by appointment. You'd likely have to order a lower online and have it shipped to him. I think his invantory is wiped out with the latest panic buying.

 

[Elwood]

If you are near the Albany area, my ffl is open by appointment. You'd likely have to order a lower online and have it shipped to him. I think his invantory is wiped out with the latest panic buying.

That’s a little far for me just to pickup the lower, I still have to order up the lock so not really in a rush. Locally I think there’s a shop working by appointment, if not my guy should be open once everything opens on the 15th

 

[BDinPutnam]

That’s a little far for me just to pickup the lower, I still have to order up the lock so not really in a rush. Locally I think there’s a shop working by appointment, if not my guy should be open once everything opens on the 15th

Sorry, I couldn't resist. FUAC.

 

[fnfalguy]

@Elwood You might be surprised how fast the orders ship from Nytriggerguards.com

Probably even make today's mail...

 

[ArmedCorgi]

Well I don't know about Covid19, but I definitely have some kind of virus, a retro virus....cause, I just came across this sale:
BROWNELLS BLEMISHED M16A1 RECEIVER SET | Brownells

and......................


I bought it.

Couldn't resist. This retro virus has me eating instant ramen, lol. Not really, but you know what I mean.
This receiver set will be the base for my next retro build, an M16A1 clone. Obviously in semi-auto. This, unfortunately, will likely not be completed until after I move. Reason being, I want it to be fully featured and functional. Just felt like this was a deal I should take advantage of.

 

[ArmedCorgi]

@Elwood You might be surprised how fast the orders ship from Nytriggerguards.com

Probably even make today's mail...

True. You ship wicked fast.

 

[ArmedCorgi]

Brownells is also running a sale on this set: Blemished XM16E1 Receiver Set Grey : BROWNELLS BLEMISHED XM16E1 RECEIVER SET | Brownells
Some good deals if you are into the retro stuff.
***Cough*** @BDinPutnam

 

[PutnamCharlie]

@Elwood You might be surprised how fast the orders ship from Nytriggerguards.com

Probably even make today's mail...

Just received an order from them today. Only ordered a few days ago.

 

[fnfalguy]

Good to hear. The postal service has been a bit hit or miss with the length of time for deliveries lately We try to get them out the same day that they come in.

Just received an order from them today. Only ordered a few days ago.