Search results

Maybe more than there are eligible voters just to be safe.

Your expander die should be able to be adjusted to leave a slight bell on the case mouth that will accept a bullet without shaving the jacket while sizing the inside of the case. This more so needed when loading cast bullets. Your seating die should also size the outside of the case as well as...

That was her SS detail!

Join the Cast Boolits forum

Yes if your tomatoes are low acid or if you are concerned use critic acid or lemon juice to lower the ph. I have 10lbs of citric acid to use in canning and to clean my brass in my wet tumbler. :)

You don't need a pressure canner to can tomatoes.

Can you slide a tool between the mag and the reciever from the top side with the bolt held back? The button that catches the pin on at the center of the mag should be accessible that way if you can get a still enough tool in there to jimmy the button back. I suspect as said that either someone...

Why not buy winter tires and just change out each season? That way you have 2 sets that perform as they are designed to and you would not have to buy tires for another 4-5yrs. That and Mavis sucks I would not recommend dealing with them.

Pic attached

For sale .32 Short Colt brass and ammo Asking $40 93 unprimed brass - Look new 31 loaded rounds - most likely reloads box of 50 Western 80gr Lubaloy

Pm sent

What would you take for the entire lot? Does $200 sound OK?

Damned trailer parks.

It is funny because I was talking with a colleague today about electric vehicles, and we are a manufacturer of electric equipment and vehicles. One of our engineers referenced a study of just Germany, and if every car, truck and piece of equipment in Germany alone were switched to electric power...

Only one DOA? Must be that training requirement is not working!!

Loaded!

Yes and I have even put one in sideways before LOL

Sweet!!

I have accouple similar that I keep in my vehicles if I need to lock my handgun away. I also use them when I am flying. Mine are combination not key though.

This actually starts to take effect on 2028 model trucks. One of my coworkers was in a meeting with the EPA and CARB and was informed of the new regulations. The exhaust aftertreatment systems at that point will need to be equivalent of 3 systems using current technology to meet the standards...

I have 2 shoulder holsters from here. They make a great product and are great to deal with. https://westernimagesleather.com/

Read this guys site. AMSEC is a pretty well respected brand. https://gunsafereviewsguy.com/

I was gonna say maybe this should be a sticky

His policy expired

Impossible it is against the law to carry on public transportation

The GF and I just did ours. on the first page after you log in at the top towards your left is a tab to apply for your DMP. Went through it without any issues. Took about 2 min each.

Probably a special guest appearance by appearance by Alec Baldwin

If you look at the time stamps this post was previous to the thread you posted.

GOA is already challenging the recently enacted Concealed Carry Improvement Act. https://www.gunowners.org/goa-and-gof-sue-new-york-over-new-concealed-carry-restrictions/

They are nice and should shoot MOA out of the box or at least the older FN version was supposed to. I don't know if the Browning variant has a chrome lined barrel either. They are a little more of a pain to strip and mags are more expensive/harder to find than an AR.

Most important part of that article

https://www.ebay.com/itm/374038500884?hash=item57166e9614:g:15MAAOSwCxRiZH1h This is not a bad deal especially if you make them an offer and they except. I have 2 of the 10-10 models.

Probably released already

Try the Tattler lids. You can get them on Ebay and Amazon as well as other sources. They are reusable. We have been using them for probably 15 years. The only thing is store them put of light and where ;pests \cant get to them as pests can chew through the lids

Circle jerk.....bring donuts!

Got my renewal back today. I took about 3 weeks. My lic# begins with WX and I have never seen one with "out of state" or "non-resident" on it.

Unloaded and locked in a hard case yes. Trigger lock is not required and you can fly with ammo in your bag or with the firearm in the hard case if packed properly. Oh and I recommend putting your name and cell # on the outside of the case, in case they need to contact you to open the case.

I say he is wrong! All you city people don't listen. Stay in the city where you belong. You wont like it out here.

Great and easy food item to grow but you have to have a supply of seeds and it is not self sustainable.

Maybe she should have opened her fart in a jar to cover the smell.

They have gun groups on FB???

Drinks are on me

Hey I'm thinking about heading to Kenosha. I heard there is an early black Friday event about to start. Who's with me?

Let the looting begin!!

The company I work for is going forward with their plan but monitoring the legal status. They have a benefits portal to go onto and report your vaccination status and documentation if vaccinated. They say it is all confidential, but my question is if it is really confidential how do you know...

Yea they sure look like they're in backwards. Also the holes in the cardboard are not bullet holes. They are in a set pattern, 3-2-3-2-3 and it looks like the cardboard is not missing from a few of the holes.

I picked up 2 pistols today. The NICS came back approved after 45 min or so. The last group of guns I bought 6 weeks ago were delayed til the next morning. Yes NICS sucks and NYS sucks worse.

Sorry not planning on going to the show and I am 45 min south of Syr. If I do pan on heading that way I will let you know.

Kid needs to find another sandbox to play in!

One new DS Arms 10 Rd .308 Win. Magazine for FN FAL. Came with another purchase and don't have a need for it. $20 FTF $25 shipped