Search results

bump, still available.

For a quality air rifle these days, your going to spend some $$$$$.

Correct. There are Dust Devil BBs made of zinc. Much less likely to ricochet, they “shatter” on impact. They shoot out of the Red Ryder no problem.

small score while just up in Maine!

Hopefully the door does hit him in the ass, which causes him to trip and fall down the stairs. Fuckface fucking fuck!!!!!

From what I’ve read up on this, it’s upto the discretion of a dive shop to fill a tank for a person with or without a dive license…also the older tanks do need to be hydro tested every five years. Been thinking of getting another PCP in a larger caliber, if I am not interested in continuing...

Has anyone used the Sterling Tornado slugs? It looks like a hybrid design of a rifled slug with "sabot". Wondering if these would work with a rifled barrel...

I come that way periodically, I have family in Elmira. I’ll keep you posted. thanks

Hey all. I have a full box of Remington CoreLokt .270 in 150gr, and a box of (17 rounds) Winchester Super X .270 in 150gr. I’d like to do a straight trade for 130gr .270. I have plenty of 130gr, the 150's dont shoot well for me, thats why I'm looking to trade them. I will also trade for...

I have a Beeman Chief 2 in .177. I have it tuned to run 30 shots on a full. Using a hand pump as it’s only a 2,000psi reservoir. Really eyeballing a .25 however.

I use Unigraphics NX at work. If you have solid works, then you have this covered! Enjoy!

What slicing software are you using? Cura has a mirroring feature to just make right and left handed prints. https://support.ultimaker.com/hc/en-us/articles/360011927800-How-to-mirror-models-in-Ultimaker-Cura

Welcome!

Runnings is empty as everyone else right now.

Whats your budget? Most of the vintage ones online that are worth a crap are just as much money as the new Colemans and others that are available at the big box stores...Runnings sells minibikes and gokarts, as does Gander Outdoors.

Hey all. I’m looking to get a portable shooting table for those days when the range I goto is crowded, and I need to head to state land to shoot. I am eyeballing 2 benches...

Syracuse.

Looking for a Thordsen for a build I’m doing. The color doesn’t matter. Message me if you have one for sale. Edit: I'm in the Syracuse area. Thanks.

These “emergency powers” should have never been open ended. There should have been sunset clauses periodically and the legislature should have been actively voting to re-instate.

If he resigns or is taken out in shackles after a tune up....doesnt Hochul take the place as acting Gov until the next election cycle?

God I hope this takes him down in the harshest and most embarrassing of ways....

Afternoon everyone! So it didn’t all come today(the pellets did), here is my new Beeman Chief 2. It’s a pre charged pneumatic(PCP) rifle. Max full of 2000psi, and has a 10 round rotary magazine. Bolt action repeater. .177 caliber as I already have some pellet guns and it didn’t make sense...

.223?

I printed one a few months ago, I got the files from Boostwillis as well. It runs ok. .223 is better than .300ACC. I did have to do some light sanding on mine around the ejection port contact faces. I printed the follower, and base in PLA, and the frame in PLA Prime. Not sure if it would...

Personal preference IMO. I bought the lefty specifically for this build. I wanted a bench gun to practice longer ranges, and also use it as a coyote rig, although its a bit heavy. My logic told me that on the bench I could charge every shot without taking my right hand off the evil grip. I...

I have one of their lefty side chargers with their heavy barrel. I set this particular one up as a straight pull rifle by disabling the gas tube/block. The side charging handle was a little tough to pull back in the beginning, but has since relaxed a bit after some use. Good shooter with good...

I have a stainless wolf with a nikon scope. I use 2 pellets of white hot powder, and a 240gr Hornady XTP bullets. Love it!

Federal site says it wont ship to NY.

i can load all ten rounds with no issues manually with the upper off the lower. The mag actually has a very small amount of wiggle room, and I have had minimal cycling and feeding issues, but not 100% without. I actually read right after I posted that Lancer mags are recommended by Bear Flag...

Hey everyone! I have a fixed mag AR and I bought a BF-10 loader to try out. Also I 3D printed a loader that looks a lot like the Mean Arms version. The AR is built with an ATI lower and the mag is a PMag gen 2 polymer 10 round. Fixed in place with Mean Arms lock. it’s either operator error...

I have a black carbine length Magpul MOE M-LOK two piece handguard that I'd like to trade for a mid-length handguard of the same style. FTF in Syracuse area, or willing to ship. Thanks.

The only thing I remember is the shipping method required my signature. I wasnt home, and had to goto the Fedex depot to get it. Not a big deal, but just FYI.

I got a full upper from them...no issues, and no complaints. I'd use them again for sure.

That would be a swell case! Thanks for the chance.

Where is this located?

Twitter also has alot of fake and bot accounts too....

I'm a basic gun owner... .177 pellet/BB .17WSM .22LR .223/556 .270 .300ACC 7.62 x 39 9mm .45ACP 20 ga. .50 cal black powder

Hey all! My wife has family in Maine. I have an unrestricted NYS handgun permit. Can I travel to Maine with an unloaded, locked up handgun out of NY and through Mass, New Hampshire, and into Maine? I read up on some things earlier on US Concealed Carry but I think I came away from that more...

my fixed mag AR with a Mean Arms lock does this. The magazine is a Pmag. I noticed this when I added the Magpul 5 round limiter. Loading the magazine with the upper open, wont allow it to close, remove one round and it closes. Using a BF-10 loader through the ejection port while the rifle is...

Ive built 2 rifles so far. One was ATI and the other was an Anderson. Both are considered low end. But both from what I could tell were fine and I had no issues with fit, finish, or assembly.

Sh*t no, too many decisions.. I do like the Hanks Belts, and I like how the Kore has the 1/4” increment adjustments, for those post Taco Tuesday lunches. I’ve looked through them all, and then Something else catches my eye.

alright...guess I'll have to check out Hanks Belts. Thanks.

Hey all. I'd like some recommendations for a good belt to wear while i carry. So far I am IWB carry at 3-4:00 or canted at 5:00. I've got a leather/kydex holster that I'm still getting used to, and also a very basic carry with a Techna-clip. I'm pretty much a tee-shirt and jeans guy if that...

I 3d printed a spacer, and its all together now!

Evening! I am replacing the crappy ATI synthetic stock set on my 500 20 gauge with a nice wood set I found online. The butt stock went on no problem. The fore end fits around the tube good. However if I slide the tube down to the extension arm, there is about an inch of reveal left on the...

A guy at work drilled and tapped his BCG and his was case hardened. once thru the case, it drilled and tapped just fine. I think he used a carbide drill and did it with the mill not a drill press. I have a side charge upper, ive thought about using it on my Ares but its on a dedicated lower...

I’m going to be framing out the cubby under the stairs soon for the ammo cans, then I can get them out of my second cabinet. Then I’ll build a locking door in the cubby. So the rifles will all be in the locked cabinet, and the ammo locked in the cubby under the stairs.

I don’t understand your brand of humor....

I do have a spot that could be retrofitted with a door and lock under the stairs...currently it’s where we keep left over floor tiles and things like that. I might have to go stare at it now. Thanks.

I emptied both cabinets and removed the shelf from one of them...I need to make a few "scope extension" cradles, the 3D printer will come in handy for that. With a little bit of design work, I figure I can make up something that can hold the BB guns on the inside of the door, and one of the...