BDinPutnam
.475 A&M Magnum
"A law to prohibit the manufacture of 'untraceable ammunition by unlicensed individuals" should do the trick.
"Ghost guns" A-9903A amended ( merged with senate ghost gun thread)
- Thread starter gunpoliticsny
- Start date
"A law to prohibit the manufacture of 'untraceable ammunition by unlicensed individuals" should do the trick.
1075tech
.338 Win Mag
SmallGameAddict
.308 Win
Ok.
So we have Federal law vs State law. Federal law sets a minimum national standard. States can and often do enact laws that are stricter than the Federal standard.
Per the Constitution, the Feds regulate INTERstate commerce. A state regulates INTRAstate commerce.
FFL= Federal license to conduct business in firearms. That means terms and conditions, which means strings attached.
NYS business licenses to conduct certain business activities in NYS, terms and conditions, strings attached.
Cuomo has threatened many business activities (and therefore licenses) during this COVID 'crisis'.
I've never in my life seen more heavy handed tactics in the United States than in the last 10 years in NYS.
You're not supposed to swap your bird barrel for your deer barrel unless you take it to a gunsmith?
Can't swap uppers on an AR receiver?
What about over and under 2 barrel shotgun sets, say 20 and 28 gauge?
What about 'convertible" .22LR/.22 Mag revolvers?
What about swapping barrels on your T/C Contender?
NYS legislators have gone off the deep end. There's going to be a lot of court cases ahead for those who get ensnared by this nightmare.
Edit: I think I may have my answer, my 'out'. Some of the above answers don't require "fitting", i.e. headspacing, milling, machining, threading etc.
So we have Federal law vs State law. Federal law sets a minimum national standard. States can and often do enact laws that are stricter than the Federal standard.
Per the Constitution, the Feds regulate INTERstate commerce. A state regulates INTRAstate commerce.
FFL= Federal license to conduct business in firearms. That means terms and conditions, which means strings attached.
NYS business licenses to conduct certain business activities in NYS, terms and conditions, strings attached.
Cuomo has threatened many business activities (and therefore licenses) during this COVID 'crisis'.
I've never in my life seen more heavy handed tactics in the United States than in the last 10 years in NYS.
You're not supposed to swap your bird barrel for your deer barrel unless you take it to a gunsmith?
Can't swap uppers on an AR receiver?
What about over and under 2 barrel shotgun sets, say 20 and 28 gauge?
What about 'convertible" .22LR/.22 Mag revolvers?
What about swapping barrels on your T/C Contender?
NYS legislators have gone off the deep end. There's going to be a lot of court cases ahead for those who get ensnared by this nightmare.
Edit: I think I may have my answer, my 'out'. Some of the above answers don't require "fitting", i.e. headspacing, milling, machining, threading etc.
Last edited:
ManrisFrack
6.5 Creedmoor
This bill defines "ghost gun" and makes it a felony to posses one as of the effective date plus 6 months.
Accoding to the "ghost gun" definition, a gun is a "ghost gun" unless it complies with the federal serialization and marking guidelines AND complies with the new NYS penal section 265.07.
Section 265.07 is a new section created by this bill. Subsection (3) states:
A GUNSMITH SHALL REGISTER WITH THE DIVISION OF STATE POLICE ANY
FIREARM, RIFLE, SHOTGUN, FINISHED FRAME OR RECEIVER, OR UNFINISHED FRAME
OR RECEIVER THAT HE OR SHE MANUFACTURES, ASSEMBLES OR CAUSES TO BE MANU-
FACTURED OR ASSEMBLED AFTER THE EFFECTIVE DATE OF THIS SECTION, REGARD-
LESS OF THE MANNER OF MANUFACTURING OR ASSEMBLY, THAT WOULD NOT OTHER-
WISE BE SUBJECT TO THE REQUIREMENTS IMPOSED ON LICENSED IMPORTERS AND
LICENSED MANUFACTURERS PURSUANT TO SUBSECTION (I) OF SECTION 923 OF
TITLE 18 OF THE UNITED STATES CODE AND REGULATIONS ISSUED PURSUANT THER-
ETO.
ANY GUNSMITH WHO FAILS TO COMPLY WITH THE PROVISIONS OF THIS SECTION
SHALL BE GUILTY OF A CLASS C FELONY.
That's the path to the registration requirement. Got a "ghost gun"? -> take it to a licensed gunsmith to make not ghosty -> gunsmith is required to register it with the state police as part of the gun exorcism process.
In reading this yet again, it definitely does not require guns that were manufactured by licensed FFL's and that already meet the federal guidelines to be registered with NYS SP by a gunsmith that modifies them. As individuals not in the business, nothing we make falls under the federal requirements. If a gunsmith does any assembly work on a home-built gun, he'll have to register it with NYS SP - even if it is marked in accordance with that federal code. We'd only be following the federal guidelines because STATE law told us to, not because FEDERAL law mandated it.
fnfalguy's screenshots look pretty close to normal AR-15 markings. It'll look totally legit if done on his Ghost Gunner mill. How are gunsmiths supposed to know if a specific gun is not subject to that federal law? Call the ATF and have them look up every gun they work on?
The example I gave above of the stock 10/22 being modified will NOT require registration but there is no similar wording in Subsection (2), the one that deals with serialization.
I need more coffee.
SmallGameAddict
.308 Win
And yet you can buy or build a car that will do 200+ mph. With absolutely no government interference. I'm jealous."A law to prohibit the manufacture of 'untraceable ammunition by unlicensed individuals" should do the trick.
meketrefe
.450/400 Nitro Ex
I am not worried a bit. This is more of the same useless BS everywhere.
However I didnt see the section onbhow they plan to stop the inflow of gosht replica guns from Indonesia or pholipines that are the favorites of gangs and cartels and many used in crimes and then discarded after they become dirtry( used in murder) and perhaps sold to el Salvador for pennies on the dollar where they will never be seen again.
What is NYS doing about that problem?
SmallGameAddict
.308 Win
Nothing. That would be racist.
BDinPutnam
.475 A&M Magnum
Thanks @ManrisFrack. If I ever run into you, I'll buy you that cup of coffee.
SmallGameAddict
.308 Win
And there I was, thinking about taking it to the next level. I was seriously considering buying additional tools to be able to thread my own barrel muzzles, and install a muzzle brake on a few of my own bolt-action rifles. Hmmmm.
Robin
.577 Tyrannosaur.
Okay, I'm on it. You wouldn't happen to know the guy I'm suppose to send my newly minted numbers to would you? Well, I guess there isn't a federal mandate for such, so I guess my date book will have to do.
Robin
Robin
.577 Tyrannosaur.
So far the regime has been silenced on the subject.
Robin
SmallGameAddict
.308 Win
Anyone out there with a "Gunsmith" license.
Love to see you post the letter you get from NYS in order to comply with this when you receive it, or post the web page.
Love to see you post the letter you get from NYS in order to comply with this when you receive it, or post the web page.
Make what you want...
Keep it tight...
No blabbering...
No showing off...
Use it, be discrete, be smart! As "experienced" firearm owners, we all should know what "smart" means Anyways...
Don't worry about the big bad wolf that isn't coming for YOU!
Unless of course your meth lab explodes, or your electric bill at your 2000sq ft home equals that of the local supermarket, so hiding your hydro lab in the basement is out! Etc ... Lmao!
And there's always that 8" PVC with a insulated and sealed 6" PVC Pipe inside, under the rock, in the back yard that they'll never find, lmao! Unless you visit it so much, you leave a trail in the grass...
Keep it tight...
No blabbering...
No showing off...
Use it, be discrete, be smart! As "experienced" firearm owners, we all should know what "smart" means
Anyways...Don't worry about the big bad wolf that isn't coming for YOU!
Unless of course your meth lab explodes, or your electric bill at your 2000sq ft home equals that of the local supermarket, so hiding your hydro lab in the basement is out! Etc ... Lmao!
And there's always that 8" PVC with a insulated and sealed 6" PVC Pipe inside, under the rock, in the back yard that they'll never find, lmao! Unless you visit it so much, you leave a trail in the grass...
Acer-m14
20×102mm Vulcan
from the FED rules .. isn't it only needs serial if you sell it .. as long as your not do it as a business ? ..
Acer-m14
20×102mm Vulcan
@SmallGameAddict
What about over and under 2 barrel shotgun sets, say 20 and 28 gauge?
what about having a 12ga over under and all caliber tubes ..
www.briley.com
What about over and under 2 barrel shotgun sets, say 20 and 28 gauge?
what about having a 12ga over under and all caliber tubes
.. Briley MFG - Side-Kick 2.0 Chamber Inserts Complete Set 20GA, 28GA, and .410 Bore
Side-Kick 2.0 Chamber Inserts Complete Set 20GA, 28GA, and .410 Bore
Acer-m14
20×102mm Vulcan
not one word of GUN in there LOL ..
ghost
noun
Save Word
To save this word, you'll need to log in.
Log In
\ ˈgōst \
Definition of ghost
(Entry 1 of 2)
1: the seat of life or intelligence : SOULgive up the ghost
2: a disembodied soulespecially : the soul of a dead person believed to be an inhabitant of the unseen world or to appear to the living in bodily likeness
3: SPIRIT, DEMON
4a: a faint shadowy tracea ghost of a smile
b: the least bitnot a ghost of a chance
5: a false image in a photographic negative or on a television screen caused especially by reflection
6: one who ghostwrites
7: a red blood cell that has lost its hemoglobin
ghost
verb
ghosted; ghosting; ghosts
Definition of ghost (Entry 2 of 2)
transitive verb
1: to haunt like a ghost
2: GHOSTWRITEghosted the mayor's autobiography
3informal : to cut off all contact with (someone) : to subject (someone, such as a former romantic partner) to ghosting— see GHOSTING sense 2No one wants to be ghosted, mostly because it sucks to admit that the person you gushed about last week is now pretending you don't exist …— Ellen Scott
intransitive verb
1a: to move silently like a ghost
b: to sail quietly in light winds
2: GHOSTWRITE
Other Words from ghostSynonymsMore Example SentencesLearn More about ghost
Other Words from ghost
Noun
ghostlike \ ˈgōst-ˌlīk \ adjective
ghosty \ ˈgō-stē \ adjective
Synonyms for ghost
Synonyms: Noun
ghost
noun
Save Word
To save this word, you'll need to log in.
Log In
\ ˈgōst \
Definition of ghost
(Entry 1 of 2)
1: the seat of life or intelligence : SOULgive up the ghost
2: a disembodied soulespecially : the soul of a dead person believed to be an inhabitant of the unseen world or to appear to the living in bodily likeness
3: SPIRIT, DEMON
4a: a faint shadowy tracea ghost of a smile
b: the least bitnot a ghost of a chance
5: a false image in a photographic negative or on a television screen caused especially by reflection
6: one who ghostwrites
7: a red blood cell that has lost its hemoglobin
ghost
verb
ghosted; ghosting; ghosts
Definition of ghost (Entry 2 of 2)
transitive verb
1: to haunt like a ghost
2: GHOSTWRITEghosted the mayor's autobiography
3informal : to cut off all contact with (someone) : to subject (someone, such as a former romantic partner) to ghosting— see GHOSTING sense 2No one wants to be ghosted, mostly because it sucks to admit that the person you gushed about last week is now pretending you don't exist …— Ellen Scott
intransitive verb
1a: to move silently like a ghost
b: to sail quietly in light winds
2: GHOSTWRITE
Other Words from ghostSynonymsMore Example SentencesLearn More about ghost
Other Words from ghost
Noun
ghostlike \ ˈgōst-ˌlīk \ adjective
ghosty \ ˈgō-stē \ adjective
Synonyms for ghost
Synonyms: Noun
spat
.700 Nitro Express
NY has a simple test.
"You're under arrest".
After that it's up to you to prove that you're part of one of the chosen classes that are let out immediately.
If you actually pay taxes, you're almost certainly not.
spat
.700 Nitro Express
They call it "microstamping" and yes, they are very much pushing that. There is also absolutely nothing in NY standing in their way anymore.
DrBleachCocktail
.44 mag
If the entire gun community became a car community over night, expect the “A vehicle manufacturer cannon manufacturer a car designed to drive or speed more than the speed limit” law.
gunpoliticsny
6.5 Creedmoor
By choice. Antis are winning by default because there is zero pushback by any 2A organization.
DrBleachCocktail
.44 mag
How do we push back? Should we start a go fund me page with an organization that we know and trust to fight for our 2A rights? Talk to our representatives that will take our rights into consideration? I really want to know because NY have gone too far.
First we would need a 2A organization.
Next we would need progun rep. And N.Y. Is too dumb to vote for one, you know just like how the blacks vote in the slave masters the Jews vote in the gas chamber experts; demonrats, what's the name of the condition where you love your capture?
Next we would need progun rep. And N.Y. Is too dumb to vote for one, you know just like how the blacks vote in the slave masters the Jews vote in the gas chamber experts; demonrats, what's the name of the condition where you love your capture?
DrBleachCocktail
.44 mag
Stockholm syndrome. Is it possible we start all over again. In 2020 we create a true NY 2A organization first then do the other step one step at a time carefully?
Stockholm syndrome
gunpoliticsny
6.5 Creedmoor
Individuals and 2A groups must be seen as part of the Democrat party constituency, go to their events and participate in their candidate selection process. This isn't difficult.
For example, there was a choice between two Dems running in Rockland for Senate. One was better than the other. Simply tell members/constituents that and to go vote accordingly. Candidates do not have to be perfect. Elections are a decision, not a referendum on the issue. Second example, there was a choice between the incumbent Westchester DA and a moonbat challenger. Moonbat Mimi is a lot worse. Simply tell members/constituents that and to go vote accordingly. By sitting by and doing nothing, Democrats do not see gun owners/2A orgs as part of their constituency and therefor do not care what they think. This isn't hard. If you don't participate, you aren't relevant.
Further, there is no effort to highlight the failure of gun control laws to relevant media. It takes a negligible amount of effort to put together a presser and distribute it to appropriate political reporters. By remaining silent reporters will cover only one side of the story. This too isn't hard either. If you don't speak up, the media won't cover you, electeds won't hear you, members/constituents think you're doing nothing, and you aren't relevant.
This isn't about money or lack of resources. This is about lack of effort.
For example, there was a choice between two Dems running in Rockland for Senate. One was better than the other. Simply tell members/constituents that and to go vote accordingly. Candidates do not have to be perfect. Elections are a decision, not a referendum on the issue. Second example, there was a choice between the incumbent Westchester DA and a moonbat challenger. Moonbat Mimi is a lot worse. Simply tell members/constituents that and to go vote accordingly. By sitting by and doing nothing, Democrats do not see gun owners/2A orgs as part of their constituency and therefor do not care what they think. This isn't hard. If you don't participate, you aren't relevant.
Further, there is no effort to highlight the failure of gun control laws to relevant media. It takes a negligible amount of effort to put together a presser and distribute it to appropriate political reporters. By remaining silent reporters will cover only one side of the story. This too isn't hard either. If you don't speak up, the media won't cover you, electeds won't hear you, members/constituents think you're doing nothing, and you aren't relevant.
This isn't about money or lack of resources. This is about lack of effort.
Really, I have for years contacted media in the Syracuse area, one time called in on a crime story where the person used a knife but they showed a handgun, I quote "Go fucking kill someone then", I called back and Chrissy Casheono(sp) got on and insisted she would be handling this call, when I quoted what the director said (I told her I would be using foul language) she bitched and slammed the phone down, I recalled and finally got another person who apologized and asked what they could do; I said to do a real report on guns showing how hard it was to get a hand gun, to use a generic picture of a round head with a torso wearing black and white striped prison suit. They have never done any of it.
DrBleachCocktail
.44 mag
A few gun owners want to take the BLM approach and start protesting while open carrying which I don’t think would end well. I do believe in either small increments or everyone in NY (since we did gain a lot of new gun owners) start voting for more gun rights.